My Cart: 0 item(s)
Due to the size of the trailers, please call us at 888-925-1966 or email us at sales@ledlighting-solutions.com to receive a shipping quote.
PRODUCT SPECIFICATIONS:
- TYPE: Solar Powered InstAlert 24 with ATS 5 Trailer
- PRODUCT CODE: ATS-INSA-24-SOL-TRL
TRAILER SPECIFICATIONS:
BATTERY: 16 ga. steel locking battery compartment with vented battery chamber, charger/accessories chamber and 1/8-inch aluminum diamond plate lid
WHEELS: 12", Five-bolt steel rims with 4.5 inch bolt circle, Locking wheel lug bolts - one per wheel, with removal tool
GROUND CLEARANCE: 9.75" under axle, 19" under chassis
JACKS: 4, retractable crank type, fully adjustable at each corner, 1500-lb capacity each
AXEL: 2000-lb leaf spring
WEIGHT: 760 Ibs with 450Ah battery capacity
TONGUE WEIGHT: 20lbs
POWER:
- 12 VDC system, standard four pin wiring plug
- 225Ah or 450Ah batteries, (2) 6VDC batteries in series, deep cycle marine (130 lbs per pair, two pair max)
- 20A time delay fuse on battery supply
- 120W solar assist with 10A solar controller to prevent overcharging, other solar wattages available
- Solar panels charge while sign stowed or deployed
- 10A 120VAC automatic charger with externally accessible AC connection
- Switch to control power to sign
SIGN SPECIFICATIONS:
InstAlert Operation Modes:
- Message Mode: Display one message, up to six screens
- All Messages: Sequence all messages in sign memory
- Schedule: Change message and/or mode up to 13 times/day
- Speed based modes available in the
- SpeedAlert 24 configuration
- Sign returns to last configuration when power applied
InstAlert Messages:
- 1–3 line messages
- 1 line: 24" H x 12.5" W characters, 4/line
- 2 lines: 10.25" H x 5.75" W characters, 8/line o 3 lines: 7" H x 4" W characters, 12 per line
- 2 lines: (1) 7" char, 12/line, (1) 10.25" char, 8/line
- Up to six screens per message
- Message power efficiency calculator in software Variable display time, flash and reverse rates for each screen
- Full graphics capability, each LED is individually controllable, programmable from PC, PDA o remotely
InstAlert Sign Power:
Power Input, Max: 12VDC, 8A max, 96 W max; 4A, 48W typical Power saving circuitry and automatic dimming for ambient light conditions with adjustable dimming range and manual display brightness override
InstAlert Settings:
- Configure the following parameters via PC, Android or TraffiCloud Web-Based Management System:
- Load message using “Display Now” feature
- load 24 messages into sign’s memory
- Scroll messages in sign’s memory
- Display signs from server or local device memory o
- Set sign mode
- Upload schedule
- Set automatic dimming range minimum and maximum levels or manually override display brightness
- Internal real time clock, time maintained with power disconnected
- Set time via local device or sync with cell signal