SKU: DNE-030-REF
REFURBISHED - 30" Solar Flashing Do Not Enter Sign

**** THIS SIGN IS REFURBISHED****

Refurbished signs may have varying cosmetic flaws and/or have been opened and re-sealed to replace parts. These signs are tested prior to shipping to ensure they are in working condition. These signs are sold as is and are final sale. For further inquiries on specific flaws, please email sales@ledlighting-solutions.com for more information.

LED solar traffic safety stop sign is an environmental protection traffic signage, It is built with a unique aluminum alloy board and solar board combined together. This stop sign will increase visibility for drivers on the road or in shopping centers with its bright blinking (flashing) LED lights.

PRODUCT SPECIFICATIONS:

This sign’s bright flashing LED lights and reflective 3M material can be seen from over 2500ft and makes for a great addition for safety pertaining traffic right of way. Made with an aluminum alloy board and solar board to MUTCD (R5-1) specifications. Solar Powered Flashing LED Do Not Enter Sign can be used to deter drivers from entering one-way streets, interstate highways, access ramps and parking lots, to help reduce incidents.

TYPE: Solar Powered Flashing LED Do Not Enter Sign

PRODUCT CODE: DNE-030

MUTCD CODE: R5-1

SOLAR CHARGING PANEL: 12V, 5W Monocrystalline Silicone

BATTERY POWER: Lithium Battery 7.4V/4400AH

WORKING TIME: After one full charge, 5-7 consecutive days

WORKING MODE: 12 Hours Per day or 24 hours per day, flashing or constant optional

SIGN COLOR: White and Red

LED COLOR: Red

DIMENSIONS: 30-inch Square (30”X30”)

CHARGE TIME: 4-5H

IP: None

BATTERY LIFE SPAN: 3-5 Years

WORKING TEMPERATURE: -20 to 150 °F 

WARRANTY: 3 Year Full Warranty

*STANDARD HARDWARE: FITS 3" to 4" DIAMETER POSTS*

JUNCTION BOX (BATTERY HOUSING)

·     STANDARD:5W /12V Solar Panel, 7.4V / 4400mAH Battery

·     UPGRADED: 8W / 12V Solar Panel, 7.4V / 6600mAH Battery (Longer Battery Life)

MUTCD GUIDELINES:

The DNE-030 adheres to the MUTCD Standards found within MUTCD Guidelines Section 2A.07 for Retroreflective and Illumination

o  Illumination of a sign by Light emitting diodes (LEDs)

o  Sign Element to be Illuminated: (1) Symbol or word message (2) Portions of the Sign border

o  LED’s are placed within 1 border unit of border and within words

o  LED’s are red in color 

o  LED’s are within ¼” in width

o  LED’s flashing at a rate of 50 times per minute

o  Background of sign is standard 3M reflective engineering grade material